1, Detailed information of product
| Basic dimension information |
| Pitch | 1.0mm |
| Color | White |
| Row | Single |
| Mating lock structure | With |
| Wire range | AWG32# to 28# |
| Wire insulation diameter | 0.80mm Max |
| Terminal materials | phosphor bronze material, tin-plated or gold -flash finish |
| Terminal Package | 20K pcs/reel |
| Terminal processing method | E-stamping before tin-plated or gold-flash |
| Matched part | A1005-T-K sereis terminal |
| |
| Electrical properties |
| Current Rating | 1A AC, DC |
| Voltage Rating | 50V AC, DC |
| Contact Resistance | 20mΩ Max |
| Insulation Resistance | 100mΩ min |
| Withstanding Voltage | 500V AC/minute |
| |
| Mechanical properties |
| Temperature range | -25℃ to 85 ℃ |
| Terminal Insertion Force | 0.50kgf (Max.) |
| Terminal/Housing Retention Force | 0.60kgf (Min.) |
| Pin Retention Force | 0.50kgf (Min.) |
| |
| Other information please kindly check the following picture. |
2, Introduction for this series products & testing report
Please kindly notice that the A1005 series product, if you can buy this product as a set, the price will be very reasonale and favorable.
1, Terminals:A1005-T-K & A1005H-T
2, Housing: With lock type: A1005HA-NP-K & A1005HA-NP & A1005HB-06P & A1005HB-NP-K
Without lock type: A1005H-NP-K & A1005H-NP
Testing report
3. Ratings & Applicable Wires
| Item | Standard |
| Rated Voltage (Max.) | 50V AC/DC | Insulation O.D. 0.80mm (Max.) |
| Rated Current (Max.) And Applicable Wires | AWG#28 | 1A AC/DC |
| AWG#30 | 1A AC/DC |
| AWG#32 | 0.5A AC/DC |
| Ambient Temperature Range | -25℃ ~ +85℃* |
*: Including terminal temperature rise
4. Electrical Performance
| Test Description | Procedure | Requirement |
| 4-1 | Contact Resistance | Mate connectors, measure by dry circuit, 20mV max., 10mA.(Based upon JIS C5402 5.4) | 20mΩ (Max.) |
| 4-2 | Insulation Resistance | Mate connectors, apply 500V DC between adjacent terminal or ground. (Based upon JIS C5402 5.2/MIL-STD-202 Method 302 Cond. B) | 100MΩ (Min.) |
| 4-3 | Dielectric Withstanding Voltage | Mate connectors, apply 500V AC (rms) for 1 minute between adjacent terminal or ground. (Based upon JIS C5402 5.1/MIL-STD-202 Method 301) | No Breakdown. |
| 4-4 | Contact Resistance on Crimped Portion | Crimp the applicable wire on to the terminal, measure by dry circuit, 20mV (Max.)., 10mA. | 5mΩ (Max.) |
5. Mechanical Performance
| Test Description | Procedure | Requirement |
| 5-1 | Actuator Insertion & Withdrawal Force | Insert and withdraw connectors at the speed rate of 25±3mm / minute. | Refer to paragraph 7 |
| 5-2 | Crimping Pull Out Force | Fix the crimped terminal, apply axial pull out force on the wire at the speed rat of 25±3mm / minute.(Based upon JIS C5402 6.8) | AWG#28 | 1.0kgf (Min) |
| AWG#30 | 0.8kgf (Min) |
| AWG#32 | 0.5kgf (Min) |
| 5-3 | Terminal Insertion Force. | Insert the crimped terminal into the housing. | 0.50kgf (Max.) |
| 5-4 | Terminal/Housing Retention Force. | Apply axial pull out force at the speed rate of 25±3mm / minute on the terminal assembled in the housing. | 0.60kgf (Min.) |
| 5-5 | Pin Retention Force | Apply axial push force at the speed rate of 25±3mm / minute | 0.50kgf (Min.) |
| 5-6 | Durability | When mated up to 50 cycles repeatedly by the rate of 10 cycle per minute. | Contact Resistance 40mΩ (Max.) |
| 5-7 | Vibration | Amplitude: 1.5mm P-P Sweep time: 10-55-10 Hz in 1 minute Duration: 2 hours in each X.Y.Z. axes. (Based upon MIL-STD-202 Method 201A) | Appearance No Damage. Contact Resistance 40mΩ (Max.) Discontinuity 1 μsec.(Max.) |
| 5-8 | Physical Shock | 490m/s²｛50G｝,3 strokes in each X.Y.Z. axes. (Based upon JIS C0041/MIL-STD-202 Method 213B Cond. A) |
3,FAQ
- Q: Can we have our own brand packaging? How?
A: Yes,we have designer in house to meet customized packaging requirment, all you have to do is let us know your idea or demands.
- Q: Does your products print exactly the same as original?
A: Compatible products were known for its favourable prices and accurate size as originals.
- Q: What is your MOQ for sample order?
A: All size sample orders are welcome.we do understand your idea to increase order gradually.
A: One on one exchange for defectives exceed our guarantee rate.
4, Our product family show
Please kindly look the next picture, you can know our product range by an easy way. Our main product are wire housing, wire to board connectoor, wire to wire connector, board-in connectors, FPC/FFC connectors and more. We also can controll defective rate in a low value, so our parts are accepted by famouse and international company like TPV, LeTV, Emerson, Amphenol Corporation, Skyworth, LuXshare, BYD etc. And the all products are certificated by REACH, UL, RoHS. In order to protect the evironment, some parts are halogen free.
Product Tags:
|
|
wire to board connector with B type lock 1.0mm pitch wire housing white color connector Images
|
